Venere Cutting Needles for badge cutting

Venere Cutting Needles - Box of 4 Cutting Needles

The system consists of 4 cutting needles, which replace the regular embroidery needles and can be used on any manufactures embroidery machine.

They are installed at an angle of 45° to each other (0° - 45° - 90° - 135°).

Simple forms such as rectangles, rhombi, squares, etc. requires only two needles for cutting. However, with all four needles, every kind of complex forms can be archived.

A simple running stitch which runs parallel to the embroidery must be inserted in the existing design. Its stitch length should not exceed 1mm.

The cutting needle has width of 1,2mm. The cutting can be programmed independently, either before or after the embroidery.

This ability enables companies to create special artwork in different branches with a higher quality, shorter production time and lower costs.

Venere Needles in action

On SWF Machines you can also to make the cutting automatic, you can also switch off the trimmers and under thread sensing control for faster usage (contact us directly on 01623 863343 to ask how)